| Lintlha tse akaretsang |
| Tlhaloso ea mofuta oa sehlahisoa | Sehokedi se ka pele |
| mokhoa oa ho hokahanya/ hlooho |
| Lipontšo tsa khokahano ea I/O |
| • Mokgwa wa kgokelo | Screw terminals |
| • Palo ea mela e hokahaneng ka 'ngoe | 1; kapa motsoako oa li-conductor tse 2 tsa ho fihla ho 1.5 mm2 (kakaretso) ka ho arolelanoa ferrule |
| Conductor cross-section in mm2 |
| - Likarolo tsa lithapo tse hokehang bakeng sa likhoele tse kholo, mets. | 0.25 limilimithara2 |
| - Likarolo tsa lithapo tse hokehang bakeng sa likhoele tse kholo, mets. | 1.5 limilimithara2 |
| - Likarolo tsa li-cable tse hokeloang bakeng sa likhoele tse tenyetsehang ntle le letsoho la pheletso, mets. | 0.25 limilimithara2 |
| - Likarolo tsa li-cable tse hokeloang bakeng sa likhoele tse tenyetsehang ntle le letsoho la pheletso, max. | 1.5 limilimithara2 |
| -Likarolo tse hokehang tsa lithapo bakeng sa likhoele tse tenyetsehang tse nang le sleeve ea pheletso, mets. | 0.25 limilimithara2 |
| - Likarolo tsa cable tse hokehang bakeng sa likhoele tse tenyetsehang tse nang le sleeve ea pheletso, max. | 1.5 limilimithara2 |
| Conductor cross-section acc. ho AWG |
| - Likarolo tsa lithapo tse hokehang bakeng sa likhoele tse kholo, mets. | 24 |
| - Likarolo tsa lithapo tse hokehang bakeng sa likhoele tse kholo, mets. | 16 |
| - Likarolo tsa li-cable tse hokeloang bakeng sa likhoele tse tenyetsehang ntle le letsoho la pheletso, mets. | 24 |
| - Likarolo tsa li-cable tse hokeloang bakeng sa likhoele tse tenyetsehang ntle le letsoho la pheletso, max. | 16 |
| -Likarolo tse hokehang tsa lithapo bakeng sa likhoele tse tenyetsehang tse nang le sleeve ea pheletso, mets. | 24 |
| - Likarolo tsa cable tse hokehang bakeng sa likhoele tse tenyetsehang tse nang le sleeve ea pheletso, max. | 16 |
| Ts'ebetso ea terata |
| -Bolelele bo hlobolisitsoeng ba likhoele, mets. | 10 limilimithara |
| -Bolelele bo khaotsoeng ba likhoele, max. | 11 limilimithara |
| -End sleeve acc. ho ea ho DIN 46228 ntle le letsoho la polasetiki | Foromo ea A, 10 mm le 12 mm bolelele |
| -End sleeve acc. ho ea ho DIN 46228 ka letsoho la polasetiki | Foromo ea E, 10 mm le 12 mm bolelele |
| Ho phahamisa |
| —Sesebediswa | Screwdriver, moralo oa conical, 3 mm ho isa ho 3.5 mm |
| - Ho tiisa torque, min. | 0.4 Nm |
| - Torque e tiisang, max. | 0.7 Nm |