Lintlha tse akaretsang |
Tlhaloso ea mofuta oa sehlahisoa | AQ 8xU/I HS |
Boemo ba ts'ebetso ea HW | Ho tloha FS01 |
Mofuta oa firmware | V2.1.0 |
• FW apdeite e khoneha | Ee |
Mosebetsi oa sehlahisoa |
• Lintlha tsa I&M | Ee; I&M0 ho ea ho I&M3 |
• Mokhoa oa Isochronous | Ee |
• Ho qala pele | No |
• Sehlahisoa se ka fokotsoa | No |
Boenjiniere le |
• MOHATO 7 TIA Portal e ka lokisoa/e kopanngoa ho tsoa ho mofuta | V14 / - |
• MOHATO 7 o ka lokisoa/o kopanngoa ho tsoa ho mofuta | V5.5 SP3 / - |
• PROFIBUS ho tsoa ho mofuta oa GSD/phetolelo ea GSD | V1.0 / V5.1 |
• PROFINET ho tsoa ho mofuta oa GSD/phetolelo ea GSD | V2.3 / - |
Mokhoa oa ho sebetsa |
• Ho etsa mehlala e mengata | Ee |
• MSO | Ee |
CiR- Tlhophiso ho RUN |
Reparameterization e khoneha ho RUN | Ee |
Calibration e khonahala ho RUN | Ee |
Matla a phepelo |
Boleng bo lekantsoeng (DC) | 24 V |
sebaka se lumelletsoeng, moeli o tlase (DC) | 19.2 V |
sebaka se lumelletsoeng, moeli o kaholimo (DC) | 28.8 V |
Tšireletso e khutlisetsang morao polarity | Ee |
Kenya hona joale |
Tšebeliso ea hona joale, max. | 320 mA; ka phepelo ea 19.2 V |
Matla |
Matla a teng ho tsoa ka beseng e ka morao | 1.15 W |
Ho lahleheloa ke matla |
Ho lahleheloa ke matla, mofuta. | 7 W |
Liphetho tsa analog |
Palo ea lihlahisoa tsa analoge | 8 |
Phallo ea motlakase, tšireletso ea potoloho e khutšoanyane | Ee |
Voltage output, short-circuit current, max. | 45 mA |
Sephetho sa hajoale, motlakase o se nang moroalo, max. | 20 V |
Nako ea potoloho (likanale tsohle), min. | 125 卩s; e ikemetseng ho palo ya dikanale tse kentsweng tshebetsong |